| 
| Constellation 
| #DAG
|
| DAG Price: | $0.047 | | Volume: | $1.3 M | | All Time High: | $0.46 | | Market Cap: | $0.1 B |
|
| Circulating Supply: | 2,618,988,076 |
| Exchanges: | 3+
| | Total Supply: | 2,618,988,076 |
| Markets: | 5
| | Max Supply: | — |
| Pairs: | 13
|
|
The price of #DAG today is $0.047 USD.
The lowest DAG price for this period was $0, the highest was $0.047, and the current live price for one DAG coin is $0.04736.
The all-time high DAG coin price was $0.46.
Use our custom price calculator to see the hypothetical price of DAG with market cap of ETH or other crypto coins. |
The code for Constellation is #DAG.
Constellation is 6.8 years old. |
The current market capitalization for Constellation is $124,039,350.
Constellation is ranked #211 out of all coins, by market cap (and other factors). |
There is a big volume of trading today on #DAG.
Today's 24-hour trading volume across all exchanges for Constellation is $1,348,879. |
| The circulating supply of DAG is 2,618,988,076 coins, which is 100% of the total coin supply. |
Constellation Network introduces Fractional Soft Node Staking
We’ve decided to reward all members of our loyal Constellation community by expanding the current soft node staking program to include fractional nodes. As network development progresses, our goal is to white list as many nodes as possible to encourage $DAG holders to build the proper collateral for a full hardware validator node. What does this mean? This means that $DAG token holders who have less than the 250,000 $DAG required to participate in the full soft node staking program may now stake their $DAG in any amount (minimum 100 $DAG) to participate in the fractional node program. Full rewards will still be offered only to full soft node stakers (those who meet the 250k $DAG requirement) as is currently the case, but additional rewards at a 50% rate will now be available to fractional soft node stakers who can stake smaller amounts of $DAG, subject to a 100 $DAG minimum. The “50% rewards” will be distributed among fractional soft nodes based on their percentage holdings of the total amount of $DAG staked across all fractional node holders. Once a fractional node holder’s staking balance reaches 250K $DAG, they will automatically be promoted to full node status and will be eligible for a share of full rewards. Note: This change to the soft node staking program does not impact the reward structure for hardware validator node operators. Fractional soft node staking will launch January 1st, 2023, with rewards dist... 
| 
Constellation Network’s Dor Traffic Miner (DTM) Redemption and Rewards Update
Attention all DTM purchasers: You’ll soon be able to redeem your DTM NFTs for DTM hardware devices! The new DTM redemption interface will go live on Wednesday, November 30th, and first shipments will commence in December. Steps to redeem your DTM NFT to receive your hardware device: Step 1: Visit the DTM NFT page at lattice.is. You can navigate to this page from the “Rewards Programs” section of Lattice.is. Note: Make sure to connect the wallet where you’ve stored your DTM NFTs. (Do this by clicking “Connect Wallet” in the upper right-hand section of the website.) Step 2: From the DTM NFT page, click “Manage DTMs” to the right of “Overview” and you will see the NFTs in your connected wallet. Step 3: Click the “Redeem DTM” button, and you will see a page where you may select the NFTs available for redemption. Select the NFT(s) you wish to redeem and click the “Verify Ownership” button. Important: DTM NFTs are redeemable by batch. Only the first batch of 313 NFTs will be redeemable on November 30th. The NFTs that are marked “Ineligible” may be redeemed when the batch that includes your NFT number is scheduled for shipment. Step 4: Clicking “Verify Ownership” takes you to a page where you fill out your contact information for shipping purposes. This will be the address to which your DTM hardware device(s) will be shipped. Once you have finished entering your data, click “Submit Form,” an...
| 
Constellation’s Stargazer Wallet integrates Exolix cross-chain swaps
Constellation Network has partnered with Exolix to offer cross-chain swaps in its Stargazer Wallet for mobile and desktop. With the Exolix integration, it’s easier than ever for our community to purchase $DAG, $LTX or $ADS by swapping from any of the nearly 500 cryptocurrencies supported by the service. Likewise, you can swap from $DAG, $LTX or $ADS to purchase other cryptocurrencies. Why Exolix? No KYC, No Max Limits: Swapping on Exolix does not require registration, and there are no maximum limits. This means that anyone can exchange any amount of currency at any time., Fixed Exchange Rate: Exolix also offers a fixed exchange rate, which is fixed at the beginning of the transaction. This protects the user from any price volatility occurring while the exchange takes place., Strong Customer Support, Highly Rated: Exolix offers 24/7 customer support and has earned an impressive 4.6 star rating on TrustPilot., How to Swap Swapping cryptocurrencies is easy with the Exolix application. Simply click “Swap” on the wallet home screen. You’ll be taken to the swap screen where you can select the currencies you’d like to swap from and to. Once you make your choices, you’ll see the exchange rate you’ll be charged and the minimum amount of cryptocurrency you’ll need to cover any network fees to perform the swap. Clicking the “Next” button takes you to a screen where you can view the details of your transaction a...
| 
Snowflake incorpora a Constellation Network como Colaborador de Datos
El conocido servicio proveedor de datos, Snowflake, añade a Constellation Network como proveedor de datos a su popular mercado de datos.. — Los datos de tráfico peatonal del Dor Traffic Miner (DTM) de Constellation están ahora disponibles para su compra en el Marketplace de Snowflake para empresas que buscan datos para mejorar sus análisis. El DTM de Constellation es un dispositivo IoT hardware portátil que puede colocarse en cualquier puerta y recoge datos de tráfico peatonal a través de sensores térmicos. Las personas que operan un dispositivo DTM reciben una compensación por los datos que recogen en forma de recompensas en la criptomoneda $DAG. Constellation también se ha asociado con el conocido proveedor de datos de localización, FourSquare, que se ha comprometido a comprar datos del DTM para la validación de los datos de visitas de sus locales. — Recompensas DTM. — Se espera que el primer lote de dispositivos DTM de Constellation se envíe antes de finales de este año. Aquellos que han pre-comprado dispositivos DTM pueden recibir recompensas diarias pagadas en la criptomoneda $DAG poco después de la compra. Todos los que adquieren un dispositivo DTM, reciben un NFT en el plazo de una semana (aproximadamente) desde la compra, que debe registrarse en nuestra “Plataforma de gestión de nodos” en el sitio web de Lattice.is. Una vez que su cartera está conectada y su NFT está registrad...
| 
Snowflake adds Constellation Network as a Data Partner
Renowned data-as-a-service provider, Snowflake, adds Constellation Network as a data provider to its popular data marketplace.. — Foot traffic data from Constellation’s Dor Traffic Miner (DTM) is now available for purchase on Snowflake’s marketplace for businesses seeking data to enhance their analysis efforts. Constellation’s DTM is a portable hardware IoT device that may be placed in any doorway and collects foot-traffic data via thermal sensors. Individuals who operate a DTM device receive compensation for the data they gather in the form of $DAG cryptocurrency rewards. Constellation has also partnered with world-class location data provider, FourSquare, who has committed to purchasing DTM data for ground-truth validation of their venue visitation data. — DTM Rewards - The first batch of Constellation’s DTM devices are expected to ship before the end of this year. Those who pre-purchase DTM devices are eligible to receive daily rewards paid in $DAG cryptocurrency soon after purchase. Everyone who purchases a DTM device receives an NFT within a week (approximately) of purchase that must be registered with our “Node Management Platform” on the Lattice.is website. Once your wallet is connected and your NFT registered, rewards can begin. A monthly rewards pool of 5 million $DAG tokens will become available for DTM device operators. The initial rewards distribution will be comprised of the following bou...
| 
Drumroll please…. Constellation Network’s Mainnet 2.0 launches September 28, 2022
After more than two years of intensive development, Constellation Network is proud to announce that the Hypergraph’s Mainnet 2.0 will launch at 12:00 p.m. UTC/5:00 a.m. PT on Wednesday, September 28, 2022. We expect the network to be down for approximately 8 hours while the code is fully switched over. The exchanges listing the $DAG token will make public announcements of the downtime and will temporarily halt withdrawals and deposits. Mainnet 2.0 — a network evolution While the first Mainnet release in January of 2020 created the foundation of our network and supported the $DAG utility token, Mainnet 2.0 is the evolution of the network that will support the L0 token standard and state channel deployment. Specifically, Mainnet 2.0 features: A new gossip protocol for scaling message passing, New schemas and upgrades for ease of use and dependency optimizations, Re-usable / extendable abstracted consensus for customization to arbitrary non-currency data types, Async threading improvements and performance testing, General refactoring and style improvements, Dependency and library upgrades, Changes to core consensus algorithm for recursive scaling, Architectural release of L0 token specification, Core state channel examples (Alkimi), NodeCTL for easily deploying a mainnet node, Speaking of nodes… With NodeCTL building a validator node has become as easy as launching a bare essential Debian-based cloud VPS (Virtua...
| 
La billetera Stargazer de Constellation añade compatibilidad con la Binance Smart Chain
La billetera Stargazer de Constellation para el navegador y dispositivos móviles ya admite tokens de la Binance Smart Chain (BEP-20) para que puedas guardar, enviar, recibir y comprar cientos de tokens adicionales. Tras haber integrado la compatibilidad con las cadenas de Polygon y Avalanche, Stargazer acaba de agregar BSC a la mezcla, integrando la extensa lista de tokens BSC de Coingecko. Para acceder a la lista, haz clic en “gestionar tokens” en la parte inferior de la pantalla de inicio del monedero y puedes seleccionar los tokens que te gustaría incluir de la lista completa de tokens de las cadenas de Constellation, Ethereum, Polygon, Avalanche y BSC. Puedes usar el botón de activar o desactivar los tokens para verlos o eliminarlos de la lista de tokens seleccionada. Si un token no aparece en la lista, simplemente haz clic en el signo más (+) en la parte superior derecha de la pantalla «gestionar tokens» y accederás a la pantalla «Añadir token personalizado». La red Ethereum está seleccionada de forma predeterminada, pero puedes cambiar la red a la de la Binance Smart Chain en la parte superior de la página. Después de seleccionar la red de la Binance Smart Chain en el cuadro desplegable, puede volver a la pantalla “Añadir token personalizado” para agregar la dirección del contrato para el nuevo token, que completará automáticamente su información y podrás agregarlo a tu lista. Nota importante:...
|
Constellation’s Stargazer Wallet adds support for Binance Smart Chain
Constellation’s Stargazer Wallet for desktop and mobile now supports tokens on the Binance Smart Chain (BEP-20) so you can hold, send, receive, and buy hundreds of additional tokens. After integrating support for both the Polygon and Avalanche chains, Stargazer has now added BSC to the mix, supporting Coingecko’s extensive list of BSC tokens. To access the list, click “manage tokens’’ at the bottom of the wallet home screen, and you can select the tokens you’d like to include from the full list of tokens across the Constellation, Ethereum, Polygon, Avalanche, and BSC chains. You may use the toggle function to turn tokens “on or off’’ to add them or remove them from your selected token list. If a token does not appear on the list of choices, simply click the plus sign (+) at the top right of the “Manage Tokens” screen, and you’ll be taken to the “Add Custom Token” screen. The Ethereum network is selected by default, but you can change the network to Binance Smart Chain at the top of the page. After you select Binance Smart Chain in the dropdown box, you can go back to the Add Custom Token screen to add the contract address for the new token, which will auto-fill its information, and you may add it to your list. Important Note: please be aware that anyone can create a custom token, including fake versions of existing tokens. To avoid security risks, make sure the token you’re adding is verified. ...
| 
La billetera Stargazer de Constellation añade compatibilidad con Avalanche
La billetera Stargazer de Constellation para el navegador y dispositivos móviles ya admite tokens de la cadena de Avalanche para que puedas guardar, enviar, recibir y comprar cientos de tokens adicionales. Al igual que lo ha hecho recientemente con Polygon, Stargazer ha integrado el soporte de Avalanche de la extensa lista de tokens de Avalanche de Coingecko. Para acceder a la lista, haz clic en “gestionar tokens” en la parte inferior de la pantalla de inicio del monedero y puedes seleccionar los tokens que te gustaría incluir de la lista completa de tokens de las cadenas de Constellation, Ethereum, Polygon y ahora Avalanche. Puedes usar el botón de activar o desactivar los tokens para verlos o eliminarlos de la lista de tokens seleccionada. Si un token no aparece en la lista, simplemente haz clic en el signo más (+) en la parte superior derecha de la pantalla «gestionar tokens» y accederás a la pantalla «Añadir token personalizado». La red Ethereum está seleccionada de forma predeterminada, pero puedes cambiar la red a Avalanche en la parte superior de la página. Después de seleccionar la red de Avalanche en el cuadro desplegable, puede volver a la pantalla “Añadir token personalizado” para agregar la dirección del contrato para el nuevo token, que completará automáticamente su información y podrás agregarlo a tu lista. Nota importante: ten en cuenta que cualquiera puede crear un token personalizad...
|
Constellation’s Stargazer Wallet adds Avalanche support
Constellation’s Stargazer Wallet for desktop and mobile now supports tokens on the Avalanche chain so you can hold, send, receive, and buy hundreds of additional tokens. Like it has recently done for Polygon, Stargazer has integrated Avalanche support from Coingecko’s extensive list of Avalanche tokens. To access the list, click “manage tokens’’ at the bottom of the wallet home screen, and you can select the tokens you’d like to include from the full list of tokens across the Constellation, Ethereum, Polygon, and now Avalanche chains. You may use the toggle function to turn tokens “on or off’’ to see them or to remove them from your selected token list. If a token does not appear on the list of choices, simply click the plus sign (+) at the top right of the “Manage Tokens” screen, and you’ll be taken to the “Add Custom Token” screen. The Ethereum network is selected by default, but you can change the network to Avalanche at the top of the page. After you select the Avalanche network in the dropdown box, you can go back to the Add Custom Token screen to add the contract address for the new token, which will auto-fill its information, and you may add it to your list. Important Note: please be aware that anyone can create a custom token, including fake versions of existing tokens. To avoid security risks, make sure the token you’re adding is verified. Check out the tutorial video below: medium.co...
|
|
|
|
|
Crypto Coin Prices and News 